Hand Held Thickness gauges

Thickness gauges are used to measure the thickness of materials such as: leather, textiles, cardboard, felt, rubber, sheet metal, foil, plastic plywood and other.

Depending on the application, the following criteria should be considered when choosing the correct thickness gauge model:

• Maximum required resolution of the measurement,
• Measuring range,
• Depth of jaws,
• The shape of the measuring feeler,
• Measuring principle.

The aluminum housing construction is lightweight and durable. The thickness gauge can be easily zeroed using the adjustment knob on the housing.

	Automatic clamping of the jaws by means of a spring, opening the jaws behind the rotating wheel,
	Automatic clamping of the jaws by means of a spring, opening of measuring jaws by means of a lever,
	Manual pressure by means of a lever, automatic opening by means of a spring,

In addition, each gauge can be supplied with a factory calibration certificate.

Thickness gauges are available in the following versions:

K SERIES

The K series is a group of analogue thickness gauges, characterized by different measuring ranges, different depths of measuring jaws and the possibility of cooperation with various measuring feet.

Specification	K-15	K-50	KA-50	K-50-2	K-50-3
Resolution	0,1 mm
Measuring range	10 mm			20 mm	30 mm
Depth of jaw	15 mm	50 mm
Bezel Diameter	36 mm	54 mm
Clamping pressure	0,5 N
Available feelers	F	A / B / C / D / E
Measuring principle
Weight (net)	60 g	300 g			330 g

Specification	K-50-5	K-100	K-200	K-300	K-400
Resolution	0,1 mm
Measuring range	50 mm	30 mm			30 mm
Depth of jaw	50 mm	100 mm	200 mm	300 mm	400 mm
Bezel Diameter	54 mm
Clamping pressure	0,5 N		1,8 N / 0,9 N / 2,5 N		1,8 N
Available feelers	A / B / C / D / E
Measuring principle
Weight (net)	350 g	450 g	700 g	1000 g	1400 g

J SERIES

The J series thickness gauges are characterized by different measuring ranges, different depths of measuring jaws and the possibility of selecting different measuring feet.

Specification	J-15	J-45	J-50	JA-50	J-100	J-200
Resolution	0,01 mm
Measuring range	10 mm
Depth of jaws	18 mm	45 mm	50 mm		100 mm	200 mm
Bezel diameter	36 mm		54 mm
Clamping pressure	0,8 N			0,8 / 0,6 / 2 N		1,5 / 1,2 / 3 N
Available feelers	F		A / B / C / D / E
Measuring principle
Weight (net)	90 g	110 g	300 g	450 g	1100 g	1100 g

Specification	J-200-30	J-300	J-300-30	J-400	J-400-30	F-1000-30
Resolution	0,01 mm					0,001 mm
Measuring range	30 mm	10 mm	30 mm	10 mm	30 mm	1 mm
Depth of jaws	200 mm	300 mm		400 mm		30 mm
Bezel diameter	54 mm
Clamping pressure	1,5 / 1,2 / 3 N					2 / 0,4 / 4 N
Available feelers	A / B / C / D / E					F
Measuring principle
Weight (net)	1350 g			1500 g		340 g

JD SERIES

JD series thickness gauges are equipped with LCD display with readable numbers, are characterized by high accuracy and the ability to present results in both millimeters and inches. They have the ability to export data through the built-in RS-232 communication interface, and the largest of them (JD-200-25) has a special, rotating foot to facilitate work when measurements are made, for example, on the table..

Specification	JD-50	JD-100	JD-200	JD-200-25
Resolution	0,01 mm
Measuring range	10 mm / 0,4 cala			25 mm / 1 cal
Depth of jaws	50 mm	100 mm	200 mm	200 mm
Similar analog meter	J-50	J-100	J-200	J-200
Clamping pressure	< 1,4 N
Available feelers	A / B / C / D / E
Display	LCD 6 digit, 8 mm
Measuring transducer	Capacity type (Sylvac)
Temperature	10 do 45°C
Battery	3V Lit, CR 2032
Interface	RS232, galvanic isolation
Measuring principle
Weight (net)	300 g	450 g	1100 g	700 g

Specyfication	FD-50	FD-200-25	FD-1000-30
Resolution	0,001 mm
Measuring range	10 mm / 0,4 inch	25 mm / 1 inch	3 mm / 0,12 inch
Depth of jaws	50 mm	200 mm	30 mm
Similar analog meter	J-50	J-200	F-1000-30
Clamping pressure	< 1,4 N		2 N
Available feelers	A / B / C / D / E		F
Display	LCD 6 cyfr, 8 mm
Measuring transducer	Capacity type (Sylvac)
Temperature	10 do 45°C
Battery	3V Lit, CR 2032
Innterface	RS232, galvanic isolation
Measuring principle
Weight (net)	300 g	1100 g	300 g